ZERON 100 (SUPERNOVA 100) Slickline

UNS S32760 WN 1.4501 PRE: >41

In addition to excellent mechanical properties, ZERON® 100 (Supernova 100®) slicklines have exceptional resistance to chloride and sulphide stress corrosion cracking, acid corrosion and crevice corrosion making it suitable for a wide range of corrosive sour well environments.

Manufactured in Switzerland and certified to 9001: 2008 all Supernova Slicklines are fully traceable, 100% Weld Free, 100% Eddy Current Tested and Wrap Tested.

Being the sole exclusive manufacturer of Zeron 100 Slicklines, we are committed to our customers in producing the best qualitied Zeron 100 Slicklines in our Switzerland mill.

All are produced with a consistent, tightly controlled surface finish, wire helix and wire cast for optimal spooling and in-service performance.

Key Characteristics:

Outstanding resistance to chloride-induced stress corrosion cracking (SCC) and sulphide-stress cracking (SSC) in sour-gas conditions

Resistant to SSC in sour, condensed waters with 0.4 bar partial pressure of H2S

Outstanding corrosion resistance under warm seawater conditions, along with superior pitting resistance

High break loads with good ductility

May be used in temperatures up to 300°C

Good atmospheric corrosion enabling safe marine / offshore storage

High resistance to abrasion, fatigue and corrosion fatigue

Very resistant in sweet wells, to corrosion by CO2

Key Data

Standard Diameter (Inches)	Minimum Breaking Load* (lbf)	Min Tensile (N/mm2) (Ksi)		Nominal Weight (lbs/ 1000ft)	Minimum Sheave Diameter (Inches)
0.092	1750 – 1800	1805	263	22.10	11
0.108	2350 – 2400	1800	260	30.55	13
0.125	3150 – 3200	1820	261	41.03	15
0.140	3950 – 4050	1760	263	51.54	17
0.160	5050 – 5150	1760	256	67.45	20

Tolerance +/-0.001" – other diameters are available on request.
* When using a portable wire tester expect a MBL figure up to 25% less than the true figure obtained on our in-house calibrated equipment.

Chemical Composition

Element		C	Si	Mn	P	S	Cr	Mo	Cu	Ni	N	W
Weight %	Min	-	-	-	-	-	24.50	3.00	0.50	6.00	0.20	0.50
Weight %	Max	0.03	1.00	1.00	0.03	0.015	26.00	4.00	1.00	8.00	0.30	1.00

Corrosion Resistance PRE Number (PRE)

PRE: >41

PRE = Cr + 3.3 x Mo + 16 x N

Pitting Resistance Equivalent numbers (PRE) are a way of comparing the pitting corrosion resistance of
various stainless steels based on the levels of chromium, molybdenum and nitrogen they contain with the most frequently used formula and Novametal’s preferred method for calculating PRE numbers being :

PRE = Chromium + 3.3 x Molybdenum + 16 x Nitrogen.

Some suppliers may use a factor of 30 x N, resulting in a marginally inflated PRE Number.

Other Slickline Grades

To request for a detailed specification of these wireline (slicklines), please